Summer Starts Here - Save up to 70%
Blue Ox Patriot Proportional Braking System Installation - 2007 Chevrolet HHR- Video
Today on our 2007 Chevrolet HHR we'll be installing a Blue Ox Patriot radio frequency portable braking system, part number BRK2012. This is a truly proportional unit. What that means is it'll slow down in conjunction with the motorhome in a direct relationship, so if you slow down for a little bit of pressure in the motorhome, the car will slow down with a little bit of pressure too. Now, we can adjust the level of braking intensity with our unit off this knob here, so if you want to have more aggressive brakes you can turn the knob all the way up to nine. That'll be the most pressure. If you don't want to have a lot of pressure, you could turn it down all the way to zero. Right in the middle, though, at five is a great place to start with, especially with this vehicle. Now, if you want to adjust it inside your motorhome, you can do that too with the wireless controller here. more
1/3/2017 2:58:49 PM
Roadmaster Stop Light Switch Kit Installation - 2011 Chevrolet HHR- Video
Today on our 2011 Chevrolet HHR, we're going to be showing you how to install the Roadmaster Stop Light Switch Kit. Part number is RM-751428. Now to begin the installation of our brake light switch, which is required in this application for the InvisiBrake. We want to install the switch into its bracket. I'm going to leave it at its shallowest setting and then we can adjust with this nut here on the back, how far out that's going to stick. As we turn this, it'll allow that switch to come further and further through that bracket, allowing us to fine tune our adjustment. Before we get this all the way up underneath our dashboard, I want to take care of getting it pre wired here. more
8/30/2016 2:28:12 PM
Roadmaster InvisiBrake Supplemental Braking System Installation - 2011 Chevrolet HHR- Video
Today on our 2011 Chevrolet HHR, we're going to take a look at, and show you how to install the Roadmaster InvisiBrake Supplemental Braking System. This is part number RM-8700. What we'll do is just simply pull that breakaway switch out of the front, and we want to see the system activate. We want to ensure that it's pulling straight down on our brake pedal, that all of our connection points are holding nice and solid. Then we'll also want to be sure, when we put our breakaway switch back in, that it releases fully. Now we want to begin by getting our box mounted into position. We want to have it so that our adjuster here is readily available. more
8/30/2016 2:26:58 PM
Roadmaster InvisiBrake Supplemental Braking System Installation - 2008 Chevrolet HHR- Video
Today on our 2008 Chevrolet HHR were going to be installing the Roadmaster InvisiBrake supplemental breaking system for towed vehicles part number RM-8700. Lets go ahead and take a look at our InvisiBrake in action. When pressing on the break pedal in the tow vehicle itll activate the InvisiBrake air cylinder which will pull on the cable and pull on the brake pedal in our towed vehicle the HHR.To begin our install we need to find a suitable mounting location for the InvisiBrake box. For this application, weve got plenty of clearance between the floor board and the bottom of the seat. Even when the seat is fully back itll still clear the InvisiBrake box. We move the floor mat out of the way. more
2/5/2015 11:08:20 AM
Filter Videos
Filter Videos
